This tutorial lists step-by-step instructions on how to flash stock firmware using Xiaomi Mi Flash Tool on Windows computer. We have found
- Android phones and tablets are usually much more than operating systems like iOS, Ti zen, or Windows 10 Mobile.
- Since this will be the first reboot after flashing a new ROM, it might take some time to rebuild cache and finish boot, have patience.
- The stock ROM has limited functionalities that are defined by the phone’s manufacturer.
- In Mi recovery mode, use volume keys to navigate and Power key to confirm.
If you are a Xiaomi Redmi Y3 user and looking for Stock Firmware (stock ROM) of the device, then we have got you covered here. We have collected Full list of Xiaomi Redmi Y3 Stock Firmware. You can download the firmware files from the download section below. You’ll usually find them outlined on the same site where you downloaded the images from. Just remember that in most cases, flashing a factory image will completely wipe your phone.
- Earlier, Xiaomi temporary shutdown MIUI ROM downloads page due to internal system update.
- Start by clicking ‘Select’ in the tool to launch the file selector window.
- To unbrick your Xiaomi device, you will need to download the stock ROM for your device.
- They provide the latest ROMs based on the China ROM.
- Suppose the phone is completely dead, and you are unable to open recovery mode in the phone then we use fastboot ROM for flash recovery.
So remember that it only supports flashing fastboot firmware but not OTA. And we could list down the supported devices for Mi flash tool as below. Xiaomi comes in an installer package where you need installing the program on the
Flashing supports those who aim at the highest optimization in the operating system. stock ROM (firmware) So Xiaomi Flash Tool is for the Xiaomi device users in targetting a wide device range. The tool runs on the Windows PC help and promises complete flashing performance of fastboot firmware files on Xiaomi smartphones and Tablets.
Once that is done, you can follow steps 1-to-3 above and launch the Terminal inside the working directory (the folder where the Fastboot ROM is extracted). Finally, issue the following command in the Terminal depending on what type of flash you wish to perform. If you’re going to attempt this, make sure that the rollback index of the downloaded ROM matches with the rollback index of the MIUI firmware currently installed on your device. Once both these things are done, click ‘flash’ in the Mi Flash Tool to finally install the MIUI Fastboot ROM on your Xiaomi/Redmi/Poco device. ‘clean all and lock’ should be used with precaution.